Skip to content
Nordhavn Logo White 656x180
  • Home
  • Models
    • Nordhavn Fleet
    • New Deliveries
    • Available For Viewing
    • Retired Models
    • Fundamentals
    • On the Drawing Board
  • News
    • Headlines
    • Nordhavn Live
    • Articles
    • E-Newsletter
    • Award Winners
  • Pre-Owned
    • Overview
    • All Listings
    • European Listings
    • Australasia Listings
    • Testimonials
  • Company
    • History
    • Team
    • Oceans Apart
  • Community
    • The Nordhavn Life
    • Nordhavn Film Festival
    • Blogs
    • Rendezvous
    • Distance Pennant Program
    • Discussion Groups
    • Social Networks
  • Resources
    • Calendar
    • Videos
    • Boat Shows
    • Merchandise
    • Charters
    • Parts
    • Vendors
  • Social Media
    • Facebook
    • YouTube
    • Instagram
    • Twitter
  • Contact
Nordhavn Logo White 656x180
  • Models

    Models

    • Nordhavn Fleet
    • Deliveries
    • Available For Viewing
    • Retired Models
    • Fundamentals
    • On the Drawing Board
    • Nordhavn Fleet
    • Deliveries
    • Available For Viewing
    • Retired Models
    • Fundamentals
    • On the Drawing Board
    Model Nordhavn 41
    Nordhavn 41
    Nordhavn Menu 0002 N475
    Nordhavn 475
    Model Nordhavn 51
    Nordhavn 51
    Model Nordhavn 52
    Nordhavn 52
    Model Nordhavn 56MS
    Nordhavn 56MS
    Model Nordhavn 59CP
    Nordhavn 59CP
    Model Nordhavn 60
    Nordhavn 60
    Model Nordhavn 625
    Nordhavn 625
    Model Nordhavn 63
    Nordhavn 63
    Model Nordhavn 68
    Nordhavn 68
    Model Nordhavn 71
    Nordhavn 71
    Model Nordhavn 75EYF
    Nordhavn 75EYF
    Model Nordhavn 76
    Nordhavn 76
    Model Nordhavn 80
    Nordhavn 80
    Model Nordhavn 86
    Nordhavn 86
    N96 Running 15
    Nordhavn 96
    Model Nordhavn 120
    Nordhavn 120
  • News

    News

    • Headlines
    • Nordhavn Live
    • Articles
    • E-Newsletter
    • Awards
    • Headlines
    • Nordhavn Live
    • Articles
    • E-Newsletter
    • Awards
    Menu Headlines
    Headlines
    Menu Live
    Nordhavn Live
  • Pre-Owned

    Pre-Owned

    • Overview
    • All Listings
    • European Listings
    • Australasia Listings
    • Testimonials
    • Overview
    • All Listings
    • European Listings
    • Australasia Listings
    • Testimonials
    Menu Testimonials
    Testimonials
    Menu All Listings
    All Listings
  • Company

    Company

    • History
    • Team
    • Oceans Apart
    • History
    • Team
    • Oceans Apart
    menu-4601
    History
    FLIBS 11 01 1 24 65
    Team
  • Community

    Community

    • N76 Spirit Of Ulysses Rides Again!
    • The Path To Awanui NZ
    • The Nordhavn Life
    • Nordhavn Film Festival
    • Blogs
    • Rendezvous
    • Distance Pennant Program
    • Discussion Groups
    • Social Networks
    • N76 Spirit Of Ulysses Rides Again!
    • The Path To Awanui NZ
    • The Nordhavn Life
    • Nordhavn Film Festival
    • Blogs
    • Rendezvous
    • Distance Pennant Program
    • Discussion Groups
    • Social Networks
    Menu Rendezvous
    Rendezvous
    ULTIMATE NORDHAVN
    The Nordhavn Life
  • Resources

    Resources

    • Nordhavn International / Circumnavigator
    • Calendar
    • Videos
    • Boat Shows
    • Merchandise
    • Charters
    • Parts
    • Vendors
    • Tech Talk
    • Site Map
    • Nordhavn International / Circumnavigator
    • Calendar
    • Videos
    • Boat Shows
    • Merchandise
    • Charters
    • Parts
    • Vendors
    • Tech Talk
    • Site Map
    Menu Calendar
    Calendar
    Navmenu Merchandise 250x175 1
    Merchandise
  • Contact
Info

REQUEST MORE INFO

"*" indicates required fields

First and Last Name*
Are you interested in getting more information on Nordhavn Boats?*
If yes, which model or models would you like more information on?
Your Address

  • NORDHAVN 76

Nordhavn 76

All Models
  • Overview
  • Galleries
  • Drawings
  • Standard Specs
  • News
  • Videos
  • Request More Info
  • Overview
  • Galleries
  • Drawings
  • Standard Specs
  • News
  • Videos
  • Request More Info

Overview

With popularity of the “northwest trawler”-style boat on the rise, PAE set out to create a new, big modern passagemaker that fused this salty look with the advanced systems of the latest Nordhavns. The result was the Nordhavn 76: developed for those yachtsmen who want an aft pilothouse boat which carries its shore boats on the foredeck. Like our venerable Nordhavn 62, the pilothouse of the N76 is set aft, carries its crane forward and can launch its shore boats off either the port or starboard side. Based on the hull form and specifications of the N72, the simple goal of this new model was to create a small superyacht which was true to the rugged ocean going heritage of other Nordhavns while at the same time stunning in her elegance, fit and finish, systems and engineering.

The boat was taken from drawing board to factory seamlessly through the efforts of Naval Architect Jeff Leishman, along with the design and engineering team at PAE, and the Taiwanese builders at our partner factory, Ta Shing. The final product has exceeded everyone’s goals.

Read More

Nearly a year was spent in the tooling and mold-building phase of this project to create the hundreds of highly polished molds required to construct this complex boat in gleaming gel coat finished GRP (fiberglass) construction.

The Nordhavn 72 took PAE to the next level and the 76 has taken off from there. An interior decorator was commissioned to up the degree of style most megayachts are known for, including crown moldings, granite, leather, well-engineered lighting, and the finest appliances. Though a little more glitzy, there’s no denying that a Nordhavn exists at the heart of this boat. Numerous handrails, half-inch tempered glass windows, watertight doors and bulkheads and many other features essential for safe operation offshore.

Like the 72, the fact that this boat is so complete, a regular options list does not exist. Standard on the 76 is chilled water air conditioning, TRAC stabilizers, bow and stern thrusters, Marquipt davit, wing engine, dry exhaust, windlass and ground tackle, and a lot more. Simply add your electronics package, tenders on deck, personal affects you’re ready to go.

The highly developed standard AC and DC electrical systems on the N76 achieve a new level of sophistication for Nordhavn and allow for semi-automatic operation of this feature-packed vessel by a small crew or even one couple.

The standard propulsion configuration of the N76 is classic Nordhavn. The single main engine is the highly respected John Deere 6135AFM in the 500 hp configuration and with its 20,000-hour life expectancy, should outlast most of us. Dry exhaust and keel cooling are standard as is the Lugger wing engine.

The N76 is also available in a twin-engine configuration. Through clever design and forethought during the tooling phase of the project, keel molds for the twin engine layout were built and can be inserted into the main hull mold prior to lamination. This feature provides twin keels and protection for the shafts and propellers of the twin screw layout.

Another choice that the buyer of an N76 is given is whether or not to have a bulbous bow or conventional bow. The N76 hull mold has two different bow configurations (conventional and bulbous) which are interchangeable and set up prior to hull lamination. The bulbous bow provides benefits but also has an unpleasant side to it and thus has become somewhat controversial in recent years. We will discuss with you your intended use of your Nordhavn 76 and help you decide which bow configuration is right for you.

Unlike other semi-custom yachts out there, buying a Nordhavn 76 need not be stressful or risky. The N76 is fundamentally a fiberglass production boat built in molds on an established production schedule by a highly competent team, which has been together for 30 years. Systems, engineering and performance are solid, well-developed and proven. You can inspect existing N76s to witness how special the fit and finish of this boat really is. Climb on board and get a feel for how comfortable it is to operate, and on a sea trial, experience the smoothness, low noise levels, sea kindliness and comfort.

Within the “production boat” safety net, you can still customize your Nordhavn with décor, equipment and features to achieve your desires. No two N76s will be alike, but all will share the same quality, seaworthiness, factory support and excellent resale value.

Forward Pilothouse

Like the Nordhavn 68, the Nordhavn 76 is available in both aft and forward pilothouse configurations. But while a number of differences exist between the 68’s two layouts, there are virtually no differences in performance or specifications between the N76 APH and FPH models – the only exception to this being the slight bump in interior volume courtesy of the increased height presented by a raised pilothouse. When considering a Nordhavn 76, the choice to go either forward or aft pilothouse is purely in the eye of the beholder and depends on whether you like a salty style or prefer clean, sleek lines.

The model’s track record shows most buyers have a penchant for the traditional trawler look of the APH, with only a handful of FPH models having been built. Either way, you’ll be getting one of the most luxurious, seaworthy, and sought-after yachts the world over.

N76 Quick Specs

LOA:76' 3" / 23.24 M
LWL:69' 0" / 21.03 M
BEAM:21' 0" / 6.4 M
DRAFT:7' 8" / 2.34 M
DISPL.:252,000 lbs. / 114.3 MT
See More Specs

PHOTOS

N76 Running 5

Running

N76 Running 5
ZOOM
N76 Running 1
ZOOM

Interior

N76 Interior 1
ZOOM
N76 Interior 2
ZOOM
N76 Interior 3
ZOOM
N76 Interior 4
ZOOM
N76 Interior 5
ZOOM
N76 Interior 6
ZOOM
N76 Interior 7
ZOOM
N76 Interior 8
ZOOM
N76 Interior 9
ZOOM
N76 Interior 10
ZOOM
N76 Interior 62
ZOOM
N76 Interior 64
ZOOM

Drawings

N76-Profile
N76-Interior
N76-FPH-Interior
N76-Port interior
N76-Starboard interior
N76-Machinery

Specifications

Specs
Structure
Machinery
Plumbing
Electrical
Steering
Interior
More Specs

LOA:76′ 3″ / 23.24 M
LWL:69′ 0″ / 21.03 M
BEAM:21′ 0″ / 6.4 M
DRAFT:7′ 8″ / 2.34 M
DISPL.:252,000 lbs. / 114.3 MT
FUEL CAPACITY:4,070 US gals. / 15,407 L
WATER CAPACITY:600 US gals. / 2,271 L
HOLDING TANK CAPACITY:150 US gals. / 568 L
GRAY WATER TANK CAPACITY:150 US gals. / 568 L

Structure

Hull Lamination schedule per PAE’s design, the area below water line to use “Isophthalic” Gelcoat and vinyl ester resin for the first three (3) layers. Deck lamination schedule per PAE’s design. “Cymax” fiberglass will be used for all deck lamination and small part lamination. This is to reduce the weight in the deck. 2 mm Coremat to be added to lamination to eliminate print through

Standard Gelcoat Colors from CCP color chart. Gelcoat for deck and superstructure to be Ferro brand “Super Shield” white

Hull- Arocoat #340 Gray

Deck and deck house – Ferro Ultrashield White

Boot top – Arocoat #348 Dark Blue

Non-skid to be N35 style – Gray # A110

Exhaust stack/flybridge – Ferro Ultrashield White

Coring

Cabin side (vertical surfaces): Klegecell # R75 varying degrees of thickness

Cabin top and deck (horizontal surfaces): Baltec or equivalent vertical end grain balsa, 1″ (2.5 cm) thick

Hull: Solid series of laminates

Top sides to 18″ (45.72 cm) above the waterline 3/4″ (1.9 cm) end grain balsa

Deck/Hull Joint

Between deck and hull flange: 3M 5200

Inside of joint: Three (3) layers M. & W.R. (where accessible)

Mechanical fastening: 3/8″ x 14 thru-bolt on 8″ centers (9.5 mm x 14 thru-bolt on 20.3 cm center)

Teak cap: Across stern only, varnished

Longitudinal Stringer

Hull: Nine (9) full length each port and starboard (total of 18), engine beds and floor stringers per PAE’s design

Ballast: 14,000 lbs (6350 kg) lead fixed per PAE’s design. Vessel trimmed to suit after launch in An Ping Harbor

Machinery

Main Engine: John Deere 6135AFM 500hp

Gear Box: Twin Disc #5114, w/ 3.43:1 reduction

Engine Instrument Panel: Three (3) EDM (Electronic Display Module) instrument panels with alarm that will monitor Tachometer, Station active, Engine oil pressure, Engine water temp, Fuel consumption GPH, System voltage, Gear oil temp, Gear oil pressure, Alarm on/off button and five step illumination control. The following display choices are available by selection from the EDM menu as standard: Trip fuel consumption, Engine load, Turbo boost, ECM voltage, Fuel pressure, Fuel temp, Smoke control status and Total fuel used

Alternator: Two (2) Alternators: One (1) 100 amp for starting batteries and one (1) 175 amp for the house batteries

Engine Controls: DDEC IV Electronic controls with brushed stainless steel finish six (6) stations: wheel house, fly bridge and aft deck, port and starboard portuguese bridge and engine room

“Air Sep” Crankcaseventilation

Two (2) 4D Batteries”Lifeline” AGM @ 255Ah each batteries connected in series for 24 volt start

Engine Bed to have 1/2” (1.27 cm) stainless steel cap

Engine mounted on (4) vibration resilient mounts or MTU Equivalent

Start up on MTU Main Engine

Propeller: Hungshen 50″ x 31″ (127 cm x 78.75 cm) 4-blade left hand rotation I.S.O. class 1

Propeller Shaft: A22HS 3-1/2″ (8.9 cm) diameter

Taper details: Standard SAE

Spurs line cutter on main engine shaft

Stern Tube: FRP

Bearing: Rubber cutlass type at aft end

Stuffing Box: Bronze-traditional

Use “T” bolt clamps in lieu of hose clamps at the stuffing box

Keel Cooler

Charged Air & Gear circuit Keel cooler: R.W. Fernstrum Model #D1693W-E1-S1

Jacket water circuit: R.W. Fernstrum Model #D869-E1

Fuel Filter: One (1) Racor 900MAX duplex with 10 micron filter elements in addition to secondary engine mounted filter

Engine Cooling System to be filled with MTU specified mixture of coolant/antifreeze

Engine Room Floors: All engine room floors and structural members to be FRP with white gel coated surfaces

Noise Control

Hull Damping: Area above the propeller rotation plane to be treated with two (2) layers of E-A-R Specialty Composites Isodamp CN Tiles (CN-62), alternating between resin and chopped glass to form a constrained layer damping system to be the inboard side of the shell plate

Engine room ceiling and fwd bulkhead treated with 2″ (5.08 cm) of 3M Thinsulate and 2″ (5.08 cm) Soundown or equivalent. Inboard tank sides, aft bulkhead, underside of deck, forward side of engine room bulkhead and ventilation ducts to be treated with 2″ (5.08 cm) 3M Thinsulate and 1″ (2.5 cm) thick Soundown or equivalent before being covered with white aluminum panels by Soundown or equivalent

Salon/galley cabin sole to have 2″ (5.08 cm) “Nida Core” core system and 1/4″ (6.35 mm) Soundown “decoupler” layer

Engine room hatches to have rubber gasket and lock down mechanism

Soundown Quite Pro lining covering or equivalent engine room intake and exhaust ventilating ducts, 1” (2.5 cm) thick secured with epoxy and mechanical fasteners

Seal all holes and cracks in engine room parameter to prevent noise leakage

Insulated bulkheads in living areas

Engine Room Ventilation: (See Air Conditioning Systems and Ventilation Systems)

Dry Exhaust System: 6″ (15.24 cm) I.D. per PAE design

Muffler: Hapco #1648VRS6 with a 6″ (15.24 cm) inlet and 8″ (20.3 cm) outlet

Custom exhaust blanket for engine room portion of exhaust

Exhaust piping under blanket is to be wrapped first with fiberglass tape

Stainless steel wrinkle belly sections per design

Soft mounted with Soundown mounts and spring hanger mounts

Wing Engine: Lugger #1064A

“V” drive ZF marine gear 2.5:1 ratio

Heat exchanger cooled

Shaft: 1-3/4″ (4.4 cm) diameter shaft A22

Spurs line cutter on wing engine shaft

Gori 3-blade folding propeller

100 amp 24 volt alternator

Twin Disc electronic controls dual station

Electronic front PTO 24 volt to operate hydraulics

Two (2) “Group 31” batteries in series for 24 volt start

25 gallon (95 liter) day tank

Racor 900MAX fuel filter with 10 micron filter element in addition to engine mounted filter between day tank and engine

Dual station panels, Wheelhouse and Flybridge

Engine bed to have 3/8″ (9.5 mm) thick stainless steel cap

Murphy gauge installed in the pilothouse

Generator #1: Onan model #MDDCA 40 kW 120/240 volt AC 60 Hz

Wet exhaust system using gen-sep

24 volt start

Alternator: 20 amp

Install remote engine panel in the pilothouse

Generator #2: Onan model #MDKBT 27.5 kW 120/240 volt AC 60 Hz

Wet exhaust system using gen-sep

24 volt start

Alternator: 20 amp

Install remote engine panel in the pilothouse

ABT Hydraulic System to include following

50 hp bow and 38 hp stern thrusters using 16″ (40.64 cm) and 14″ (30.48 cm) tunnels with proportional controls at five (5) stations. Eye brows to be installed on the hull to allow water to pass smoothly over bow thruster

Hydraulically powered anchor wash pump – 180 gallons (681 Liters) per minute

Hydraulically powered 180 gallons (681 Liters) per minute emergency bilge pump with manifold system and plumbing to five (5) bilge areas

TRAC #370 digital stabilizer system with 16 sq. ft. (3.6 sq. m.) fins and dual station control. Stainless steel kelp cutters forward of fins tied to bonding system. System is without winglet assembly.

Two (2) Maxwell VWC 4500 windlasses with dual station controls for each. Each windlass to have band brakes

Hydraulics cooled by a hyd. cooling pump and two (2) heat exchangers one (1) return side and one (1) case drain side

Work Bench to have swivel vise in engine room

Plumbing

Water Tanks

Number and capacity: Two (2) tanks totaling 800 gallons (3028.3 liters)

Material: Fiberglass from male molds with FDA approved gel coated interior

Inspection plates: Appropriately positioned and sized for access

Tanks air tested to 4.5 lbs (2.04 kg) per sq. inch

Each tank to have “Wema” level gauge

Each tank to be fitted with sight gauge

Tank baffles to be spaced on 24″ (61 cm) centers

Exterior of tanks finished in blue gel coat

Tanks to comply with ABYC section H-23 for potable water systems for use on boats

Cleanliness: Tank interior surfaces to be thoroughly vacuumed and wiped down prior to final closure

All hoses and cables running through watertight bulkheads to be ran through Roxtec and Ta Shing designed watertight fittings

Fuel Tanks

Number and capacity: Four (4) main tanks totaling 4,100 gallons (15520.2 Liters) with one(1) centerline aluminum “Day Tank” at 80 gallons (303 Liters) which will gravity feed from main wing tanks

FRP construction from male molds using Vinyl ester resin. To comply with all ABYC codes for diesel fuel tanks. Tanks to be coated with fire retardant gelcoat on outside to comply with ABYC section H-33.20 for fire resistance

Inspection Plates appropriately positioned for interior access by average size man. Plates to be fitted with labels that contain all information as stated in ABYC section H-33.16.3. Each internal baffle to have a removable panel to allow access to entire interior of all fuel tanks

Fuel system to include a powder coated aluminum supply reservoir, which feeds by gravity from all four (4) fuel tanks. A light and audible alarm in wheelhouse if excessive water is present. Reservoir fitted with five (5) draw spigots for main, two (2) generators, wing engine and spare – mounted at lower level of reservoir but above water sensing probe. All returns from main, wing and generator plumbed into reservoir via a return manifold

Sight gauges provided for all four (4) fuel tanks

Each tank to be air tested to 4.5 lbs (2.04 kg) per sq. inch

Provide baffles on 24″ (61 cm) centers

Transfer manifold and 3.5 gallons (13.25 Liters) per minute fuel pump with timer switch and Racor 1000 fuel filter with 10 micron element which can transfer fuel from one tank to another and scrub fuel while transferring

Exterior of tanks finished in red gel coat

Cleanliness: tank interior surfaces to be vacuumed and wiped clean before final closure

Each tank to have two (2) 1” (2.5 cm) I.D. vent lines

Each tank to have separate 2” ( 5.08 cm) I.D. fill pipe located a minimum distance of 18” (45.72 cm) from any ventilation openings

All hardware that comes in contact with fuel to be bonded into the 24 volt DC ground system

Fuel Pipe and Hose

Fuel lines from supply reservoir to optional generator and wing engine to be 1/2” (1.27 cm) I.D. with Aeroquip brand fuel hose and swaged fittings

Fuel line from supply reservoir to main engine filter is 3/4″ (1.9 cm) I.D. with Aeroquip brand fuel hose and swaged brass fittings

Fuel lines from supply reservoir to optional generator and wing engine to be 1/2” (1.27 cm) I.D. with Aeroquip brand fuel hose and swaged fittings

Vent lines to be fuel certified, reinforced hose 1” (2.5 cm) I.D

Water Hoses

Cold water: Hose from water tanks to water pump should be reinforced suction rated hose. Hose from pump to accumulator should be pressure rated reinforced hose. Branch lines to be 1/2″ (1.27 cm) Shurflo semi-rigid tubing (blue)

Hot water: Reinforced 1/2″ (1.27 cm) Shurflo rigid tubing (red)

Sea water hoses: Reinforced for marine use and provided with double stainless steel clamps below the water line

All hoses used shall meet the requirements for service as set out by ABYC for the system intended

Heater: RHEEM Vanguard Low Boy, 47 gallon (178 Liter) with dual 240 volt AC elements for quick recovery

Thru Hulls: Bronze body, Stainless Steel Balls and Teflon seats

Grounding wire: #6 gauge green wire

Each thru hull to have a clearly visible tag indicating use.

Each thru hull to be easily accessible

Fresh Water System

Main Pump: Headhunter Mach 5 Model #M5-115 – 120 volt with pressure regulator and Groco WSA-1000 strainer on pump inlet

Groco #PST5 accumulator tank with pressure gauge

Hose from water tanks to water pumps and to accumulator to be 1″ (2.5 cm) diameter reinforced and approved for potable water

Back up Pump: Head hunter “X-Caliber” 12-24 volt DC pump Model # XR-124

Filter: US water filter housing with a 5 micron sediment filter installed downstream of fresh water discharge manifold

Pump Selection Manifolds x two (2): Pump inlet and discharge manifolds made of stainless steel standard pipe. Supply manifold furnished with isolation ball valves from each fresh water tank, to each fresh water pump, and from the water maker. Discharge manifold furnished with isolation valves from each pump

Plumbing Fixtures

Head sinks: Owner’s, lower head, forward guest, and wheel house. HCG white sinks. (4 total)

Galley sink: Double stainless steel corner style Kohler #K-3351

Head faucets: Grohe Model# 33413-0000 chrome. (4 total)

Cockpit and flybridge sink faucet to be Shurflo folding faucets

Galley sink faucet to be Grohe Model# 32999 1 K0 chrome/black

Engine room sink faucet to be local made stainless steel

Engine room sink, fly bridge and aft deck sink: local made stainless steel

Shower fixtures: Three (3) All Grohe #28179 handle, #28631 soap dish, #28.620 24″ shower bar, #28.151 hose, #34.436 thermostat valve

Engine Room Sink Sump Pump System

One (1) FRP drain basin, approximately 5 gallon (18.9 Liter) capacity. Basin to have a bolted flange top cover, separate 1-1/2″ (3.8 cm) drain inlet from engine room sink, a 3/4″ (1.9 cm) bottom outlet to the discharge pump, a RULE-A-MATIC float switch, and a 3/4″ (1.9 cm) overflow to the engine room bilge

One (1) Whale Gulper 220, 24 volt IM BP 1554. Pump to auto start by float switch actuation and discharge to the gray water tank. Pump discharge to be equipped with a swing check valve

Bilge Pumps

Electric: Six (6) Par Jabsco 34600-0010 24 volt 10.8 gallon (40.8 Liter) per minute Diaphragm 1″ (2.5 cm) diameter ports, with “Ultra Senior” 24 volt auto float switch # UPS-01-24/32. One (1) in each water tight compartment

Manual: Four (4) Edson Model #638 AL. One (1) in each water tight compartment

Hydraulic drive emergency pump: One (1) “Pacer” 180 gallon (681 Liter) per minute plumbed to all water tight compartments. Manifold for emergency pump to be located in easily accessible location

High Water Bilge Pump System – Engine Room: RULE Model 16A, 3700 gallon (14,006 Liter) per hour, 24 volt AC RULE Model #33AL High Water Bilge Alarm, and “Ultra Senior” bilge switch

High Water Bilge Alarm Panel – Pilot House High water bilge sense will come from std. Ultra Senior in each bilge compartment. Visual and audio alarm panel in pilot house

Toilets and Holding Tank System

All toilets to be Tecma Silence Plus (4 total)

Water supply to toilets to be fresh water only

Holding Tank: One (1) FRP 200 gallon (757.1 Liter) holding tank

Use only PVC pipe or Trident “Odor Safe” hose

Holding tank overboard pumps: Edson “Bone Dry” #120ELB 20 gallon (75.71 Liter) per minute 120/208-230 volt AC electric and Edson “Bone Dry” #557BR 30 gallon (113.56 Liter) per minute manual pump

Holding tank vent to use Sealand# 310002 vent filter

Deck fitting for portable evacuation facility

Holding Tank Level Monitor: Sealand 24 volt Tank Watch 4 Panel/Tank Master Panel and Cap with Vent, 45″ (1.14 m) probes Part #600115, including Universal Flange, 3″ NPT (7.6 cm, NPT) with gasket and stainless steel hardware, 24 volt

Install Techma 2 button marine wall switch in each head

Install “Do Not Flush” panel at every toilet

Black water hoses to be Trident #102

Fresh Water Outlets on the foredeck, aft deck, flybridge and one (1) in engine room using stainless steel spigots

Gray Water System

Tank: One (1) FRP 200 gallon (757.1 Liter) tank. All sinks, showers, and air conditioning condensate to drain to tank. All drains to have “P” traps and sloped down hill run to tank. Exception: lower level head sink and shower and E/R sink drains will be pumped to gray water tank with Whale “Gulper” pump. Tank equipped with electric and manual discharge pumps, level switch for pump starting, and level monitor system

Electric Discharge Pump: Sealand T24 Discharge Pump 24 volt with auto/manual switching. Pump inlet to draw within 1″ (2.5 cm) of the absolute bottom of the tank. Pump to discharge overboard through anti siphon loop

Level Switch: ULTRA Junior Pump Switch (float type) Model WPS-02-24/32, 24 volt to auto start and stop the gray water pump in the AUTO mode. In AUTO mode, switch to start pump at 2-1/2″ (6.35 cm) depth and stop pump at 1″ (2.5 cm) depth

Level Monitor System: Sealand 24 volt Tank Watch 4 Panel/Tank Master Panel and Cap with Vent, 45″ (1.14 m) probes part #600115, including Universal Flange 3″ (7.6 cm) NPT with gasket and stainless steel hardware

Manual back up pump: Edson Model #638AL

Install Hepvo odor valve on the gray water system before tank

Transom Shower to be Scandvik # 101513-MR

LPG System with two (2) 30 lb. (13.61 kg) aluminum LPG bottles with “Trident” two stage regulator and “Xintex” monitor panel #XINTX#S-2A with two (2) sniffers located per PAE design. System to meet all ABYC and USCG regulations

Bosch Washing Machine #WAS 24460UC and 240 volt AC Bosch Dryer #WTV 76100US located in Laundry room on lower level

Individual Raw Water Inlet thru hulls per item requiring raw water

Wing engine, generator(s), water maker intake and air conditioning

Each inlet to have Groco strainer

Each thru hull on the exterior to have grate installed to keep debris out

Oil Change System

System utilizes a 120 volt AC Oberdorfer Gear Pump Model #OBN993M-F36-RC 4.8 Gallon (18.17 Liter) per minute to drain and fill engine lube oil from/to crankcases of main, wing, and generator(s) engines. Pump is controlled by a three (3) position switch mounted at pump location. Switch positions to be labeled “ENGINE OIL DRAIN”, “OFF”, “ENGINE OIL FILL”

Manifold, pump and control switch to be located in an accessible and comfortable location. Engine side of manifold to include isolation valves for each engine. Pump discharge/fill side to include a hose of suitable length for drawing from and discharging to a locally placed container

All Pumps and Motors to be mounted on starboard or PVC pads

Electrical

AC System

Vessel is fitted with two (2) 240 volt AC shore inlets. House shore power is fed through a 12KVA isolation transformer. The air conditioning may be operated from the house shore power or from its own dedicated shore power inlet which is equipped with a galvanic isolator. The air conditioning may be operated from either 50 Hz or 60 Hz current. Current is distributed through custom PAE electrical panels containing 240 volt AC and 120 volt AC sections, volt and amp meters and individual breakers for functions

One (1) 3.5 kW 24 volt inverter/charger with remote control panel. Electrical panel is fitted with an inverter bypass switch in the event of failure

AC Outlets are standard Vimar US format 120 volt AC

All Vimar outlets in head compartment, galley, ER and exterior are GFCI type

All external outlets have water proof covers

Two (2) Glendinning shore power cord retrieval systems are provided. One (1) each for the 240 volt house shore power and air conditioning shore power. Each system to be provided with 100′ (30.48 m) of shore power cable

Install (2) 100′ (30.48 m) 100 amp shore cords at the transom for the Glendinning system

DC System

DC power is provided by 12 volt DC and 24 volt DC systems. The primary DC system is 24 volts and the secondary system is 12 volts for any equipment that is available in 12 volts only

Standard batteries are provided as follows

24 volt DC house battery bank – Consists of eight (8) 8D, 12 volt AGM Batteries @ 255 Ah each. Four (4) groups of two (2) batteries each are connected in parallel. The two groups are connected in series to provide a total battery bank rating of 1000 amp/hr at 24 volt

12 volt DC house power is drawn from one (1) 8D battery located in the PH

Main engine starting – Two (2) 4D AGM Batteries connected in series for 24 volt starting. Switching logic to parallel with 24 volt house bank for emergency starting

40 kW Generator starting – Two (2) “Group 31” AGM Batteries connected in series for 24 volt starting

Wing Engine/27.5 kW Generator starting – Two (2) “Group 31” AGM Batteries connected in series for 24 volt starting

24 volt battery charging is provided in the following ways

The inverter/charger provide a total of about 100 amps at 24 volts

One (1) Victron Skylla 100 amp charger which operates on 240 volt AC-50 Hz or 60 Hz. This charger is a back up to the inverter/charger

Main engine starting battery bank is charged from a dedicated alternator on the engine

40 kW Onan generator has a 20 amp 24 volt alternator which charges the starting battery

27.5 kW Onan generator has a 20 amp 24 volt alternator which charges the starting batteries

Wing engine has a 100 amp 24 volt alternator which charges the starting battery

Xantrax Tru-Charge 20 for the 12 volt battery in the pilothouse

Battery Cable: to be sized and color-coded

Wire Color Coded per ABYC standards when possible

All Wiring to be “tinned” copper

All Wiring Connections except behind electrical panels to be sealed with “shrink wrap”. Connectors to be ring type with closed end seamless construction

SSB Radio Ground Plate and Lightning Ground Systems

Electrolysis Control

All thru hulls to be bonded together with a #6 green wire and tied into the DC ground system

All hardware mounted below water line – i.e. stuffing box, rudder shoe, rudder frame, all thru hulls, engines, and strainers to be grounded into bonding system

Zinc plates: Three (3) zinc plates to be tied into the bonding system

“Perry nut” zinc on end of propeller shaft

Collar zinc on the wing engine shaft

AC Genset 1 – Onan 40 kW #MDDCA with sound shield providing 120/240 volt AC current at 60 Hz

AC Genset 2 – Onan 27.5 kW #MDKBT with sound shield providing 120/240 volt AC current at 60 Hz

Generator fuel filter- Racor 900FG

Electrical Panels (subject to change)

Main AC distribution and control panel located in forward stb corner of salon

Main DC distribution and control panel located in forward stb corner of salon

Sub DC distribution panel in wheel house with pump monitor lights

House battery control panel in fwd foyer/laundry area

Engine/gen start battery and emergency parallel control panel at entrance to engine room

Generator start/stop panel in wheel house

Steering

Kobelt Hydraulic Steering System – 35 degree Rudder Deflection, Single Station (wheel house)

Recessed Helm Pump x one (1): Model #7012-AL

Unbalanced Cylinders x two (2): Model #7065-U12 2″ (5.1 cm) Bore with 12″ (30.48 cm) stroke

Safety and Bypass Valve: Model# 7020

Twin Arm Tiller Arm: Model# 7052-T

Filler Tank: Model #7002

Hydraulic Lines: Seamless copper tubing 3/4″ (1.9 cm) I.D. with reinforced rubber hydraulic lines to the hydraulic rams

Steering Wheel: 30″ (76.2 cm) stainless steel destroyer type in wheel house x one (1)

Emergency Tiller: To attach to top of rudderpost and stow in lazarette – fabricated of stainless steel with 1″ (2.5 cm) I.D. S/S eyes welded 10″ (25.4 cm) in from the end of the tiller arm for attaching a block and tackle rig. 10. The emergency tiller deck plate will be accessed via locker doors on the transom inboard bulkhead. This is in lieu of creating a recess for it

Stainless Steel Steering Manifold located in lazarette with valving for two (2) autopilot pumps

Rudder

Rudder Stock: 3-1/2″ (9 cm) A22HS

Rudder: 1/2″ (1.27 cm) # 316 stainless steel plate rudder with stiffening ribs

Rudder Carrier Shoe: Two piece fabricated 316 stainless steel. Main piece fastened to hull by rivets. Aft piece removable so that rudder can be removed. Shoe to be tied into bonding system and to have attached zinc plate

Rudder Stock Stuffing Box: Bronze traditional style

Rudder Stock Tube: FRP with bronze/rubber cutlass bearing at the bottom

Use “T” bolt clamps at the stuffing box

Interior Finish / Equipment

General: NH57 style joiner work

Cushions to be covered with owners choice of ultraleather

Interior steps to all be teak

Interior lockers and drawers to be locking Timage with chrome push button

Interior overhead panels – Majilite Finesse Natural. Removable, held in place by Velcro

Interior door lock sets to be Mobella “Mc Coy” chrome brass

Hanging lockers to have automatic interior lights controlled by micro switch. Lined with “Cedar wood”

Solid (non louvered) cored doors for heads and staterooms 1″ (2.5 cm) thick

Interior teak woodwork including cabin sole in pilot house to be varnished with 60% satin varnish

Salon tables, pilothouse table to be varnished with high gloss varnish

All hand rails to be teak

Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this

Mirrors are located thru out vessel

Ceiling material in all showers to be FRP same as the older 57’s

All interior drawers to have metal drawer slides

Install Orcas magnetic door catches on all interior doors

All drawers to have plywood finish on the inside

All lockers in the galley, heads, laundry room and pilothouse dash area to be white formica

Lockers in the salon, staterooms and the pilothouse settee and desk area to be teak veneer

All book shelves to have teak fiddles

Galley

Sub Zero #561 side-by-side refrigerator/freezer with teak panels

One front loading U-Line 75F freezer located in laundry area lower level

Counter top: Granite with bull nosed edges, buyer’s choice from the Taiwan Marble Association catalogue

Floors: Buyer’s choice of tile from the San Marino catalogue, Symphony brand tiles

Cabinet paneling: All teak

Interior locker finish to be white formica

Interior drawer finish to be plywood

Thermador stove/oven #PRD304EHU LPG stove with electric oven

GE “Advantium” convection/microwave oven #SCQ2001KSS with exhaust blower

GE “Monogram” trash compactor #ZCG150LSS 15″ (38.1 cm) stainless steel

Bosch dishwasher #SHX57C05UC 24″ stainless steel

Insinkerator garbage disposal “Pro Essential” 3/4hp

Stove alcove to be lined with granite

Install pot holder rail system around the stove

Main Salon

Floors: Carpet with Soundown underlayment pad

Cabinet/paneling: Varnished teak

Dinette table: Teak with high gloss varnish. Six (6) teak chairs with upholstered seats

Interior locker interior finish: Teak

Interior drawer interior finish to be plywood

Install Aritex TV lift for a 42″ (106.7 cm) TV. (TV not included)

Teak valance/air con soffet port and starboard and aft sides of salon

Two overhead teak hand rails

Teak coffee table starboard side with high gloss varnish

Settee along starboard side with storage underneath

Master Cabin

Floors: Carpet with Soundown underlayment pad

Cabinet/paneling: Varnished teak

Hanging locker interior finish: “Cedar wood” natural finish

TV locker with retractable doors (TV not included)

Mattress: Standard king size

Locker interior finish to be teak

Drawer interior finish to be plywood

Master Head

Floors: Buyer’s choice of tile from the San Marino catalogue, Symphony brand tiles

Counter top: Granite w/ bull nosed edges, buyer’s choice from the Taiwan Marble Association catalogue

Mirrors and towel bars: As shown on drawings

Molded FRP shower stall

Cabinet/joiner work: All teak

Drawer interior finish to be plywood

Locker interior finish to be white formica

Head exhaust blower with 30 minute timer

Toilet paper holders Keuco #14962

Towel bar # Keuco #14901 24″ (61cm)

Frameless clear glass shower door and chrome hardware

Ceiling material in shower to be FRP covered plywood same as the 57’s

Guest Cabin Forward

Cabinet/joiner work: Teak paneling with solid trim

Hanging locker interior finish: “Cedar wood” natural finish

Mattress: Standard 5″ (12.7 cm) foam covered with cotton mattress ticking

Locker interior finish to be teak

Drawer interior finish to be plywood

Guest Head Forward

Floors: Buyer’s choice of tile from the San Marino catalogue, Symphony brand tiles

Counter top: Granite w/ bull nosed edges, buyer’s choice from the Taiwan Marble Association catalogue

Mirrors above sink

Molded FRP shower stalls with FRP ceiling

Locker interior finish to be white formica

Drawer interior finish to be plywood

Exhaust blower with 10 minute timer

Toilet paper holders Keuco #14962

Towel bar # Keuco #14901 24″ (61 cm)

Aluminum and glass bi-fold shower door

Pilothouse

Floors: Teak and spruce

Cabinet/joiner work: Varnished teak

Countertops and instrument panel faces: Formica #939 dark gray

Dinette table: Teak with high gloss varnish

Settee with chart drawers under

Helm seat – Two (2) Stidds 500N-2X2 Low Back “Slimline”. Vinyl and pedestal powdercoat color are buyer’s choice

Chart light: Imtra #IL5313 Touch LED light, bulkhead mount 19″ (48.26 cm)

Book shelves and chart drawers

Hand rails: One (1) each on the port and starboard forward doors

Compass- Ritchie SS 5000 5″ (12.7 cm) mounted on teak block

Dash area locker to have white formica interior finish

Settee area lockers to have teak interior finish

Drawer throughout the pilothouse to have plywood finish

Pilothouse dash console to wrapped in buyer’s choice of leather

Pilothouse Head

Floors: Teak and spruce

Cabinet/joiner work: All teak

Exhaust blower with 10 minute timer

Counter top: Granite w/ bull nosed edges, buyer’s choice from the Taiwan Marble Association catalogue

Locker interior finish: White Formica

Drawer interior finish: plywood

Towel bar # Keuco #14901 24″ (61 cm)

Toilet paper holders Keuco #14962

Mirror above sink

Forepeak (Chain Locker)

Shelves: Longitudinal plywood shelves with 12″ (30.5 cm) fiddles provided port and starboard for storage

Anchor line deck hawse fitting

Two pad eyes in locker

Finish: Painted with white gel coat

Locker to be divided for dual anchors and chain

Midship Passageway to E/R and Lower Guest Cabin

Bulkheads to be finished: Varnished teak

Walk-in pantry with shelves and louvered door

Flooring to be teak and spruce

Lower Level Guest Cabin

Floors: Carpet with pad

Cabinetry and joiner work: Teak

Mirrors above dressers x two (2)

Hanging locker with “Cedar wood” lining

Book shelves and lockers outboard of berths

Drawers under berths (4 total)

Mattresses: Standard twin size x two (2) 5″ (12.7 cm) foam covered in cotton mattress ticking

Forced air ventilation system with adjustable blower

Locker interior finish to be teak

Drawer interior finish to be plywood

Lower Level Head

Floors: Buyer’s choice of tile from the San Marino catalogue, Symphony brand tiles

Cabinetry: Teak

Shower to be molded FRP, ceiling also to be FRP

Exhaust blower with 10 minute timer

Counter top: Granite w/ bull nosed edges, buyer’s choice from the Taiwan Marble Association catalogue

Aluminum/glass bi-fold shower door

Towel bar # Keuco #14901 24″ (61 cm)

Toilet paper holders Keuco #14962

Locker interior finish to be white formica

Drawer interior finish to be plywood

Air Conditioning  |  Fire Protection System  |  Lighting  |  Exterior Deck Hardware

Air Conditioning

Air Conditioning System

Cruisair Tempered Water System (chilled water) 108,000 BTU/hr 230 volt AC 60 Hz

Modular Tempered Unit: Three (3) MTC36

Control Panel: MPEDR2UC1 (TALC 2-Unit Panel, two (2) Pump Relays 230 volt 1 PH)

Air Handlers BP 230 volt

One (1) Cruisair CBBL6C – Lower Mid Cabin

One (1) Cruisair CBBL12C – Forward Cabin/Laundry Room

One (1) Cruisair CBBL12C – Master Stateroom

Two (2) Cruisair CBBL18C – Galley/Salon

One (1) Cruisair CBBL12C / One (1) Cruisair CBBL18C – Wheel House

One (1) Crusiair CBBL9C – Captain’s Cabin

One (1) Cruisair CBSB24C Slimline – Engine room

Circ Pump: 344012

Sea Water Pump: PS1500BX

Controllers

Eight (8) SMXHT Digital controls

Eight (8) CXP10 Cable Interconnect

Eight (8) TSEP10 Cable Temp Sensing Element with RF-11

Accessories

EXT120 Expansion Tank-TW-Bladder

BFC27 Balancing Flow Control

1060915 Automatic Vent

1070200 Backflow Preventer Valve

1070201 Pressure Regulator Valve

Engine Room Ventilation System

Two (2) Intake Blowers – Grainger #3C964 230 volt AC 50/60 Hz rated at 1,210 CFM @ 0.0″ SP @ 60 Hz. Two (2) louvered vents on aft deck wings with screened blower inlet

One (1) Exhaust Blower – Grainger #IXJY4 230 volt AC 50/60 Hz rated at 1,210 CFM @ 0.0″ SP @ 60 Hz. One (1) vent on aft side exhaust stack with screened blower inlet

Fire/Smoke Dampers: Ruskin CD36 Low Leakage Control Damper, 12″x12″ (30.5 cm x 30.5 cm) Stainless Steel Rear Flanged equipped with a side mounted Honeywell H-2024 (24 volt DC) Fast-Acting, Two Position Actuator. One (1) damper each installed on the engine room side of each blower for easy access. Each damper will be normally open and will close on Seafire actuation. For boats equipped with main engine dry exhaust, one (1) damper each installed on the inside of each main engine exhaust stack louvered vent opening – damper size to be compatible with stack opening

Auto Blower Stop and Damper Closure on Engine Room Seafire Actuation (See Fire Protection System)

Note: See Noise Control item section B. 9 F

Lazarette and Forward Machinery Compartment

One (1) Exhaust Blower each compartment (3 Total) – Grainger # 5C517 , 120 volt AC. 60 Hz – rated at 150 CFM

Auto Blower Stop on Seafire Actuation in the compartment

Forward bilge and machinery compartment blowers to be 24 volt continuous duty

Install stainless ladder from the lazarette to the cockpit level. On the cockpit level a vertical handrail on the BBQ console to allow a person to easily climb out of the lazarette

Heads

One (1) Exhaust Blower each head (5 total) – Grainger # 5C516 , 120 volt AC. 60 Hz – rated at 150 CFM. On/Off wall switch for blower start and stop

10 minute timer for each exhaust fan

Staterooms

One (1) Supply Blower for master, forward guest staterooms, lower stateroom (4 total). Grainger # 5C516 , 120 volt AC. 60 Hz – rated at 150 CFM. On/Off wall switch for blower start and stop

Outside air supplied from a louvered intake and ducted to the stateroom. Exhaust air from each stateroom routed to berthing passageway

Blower located to insure minimal noise in stateroom 

Fire Protection System

Seafire Fixed System Fire Extinguishers

Engine Room

One (1) Seafire Model #FD-1500-M

One (1) Seafire Automatic Engine Shutdown System Model #131-261

24VDC for main engine, generators, engine room blowers, fire/smoke dampers

One (1) Seafire Manual Discharge Cable 30ft Model #135-030

Lazarette

One (1) Seafire Model FD-1100-M

One (1) Seafire Deluxe Discharge Alarm Model #131-401

Forward Bilge #1

One (1) Seafire Model #FD-300- M

One (1) Seafire Deluxe Discharge Alarm Model #131-401

Forward Bilge #2

One (1) Seafire Model #FD-300- M

One (1) Seafire Deluxe Discharge Alarm Model #131-401

Portable Fire Extinguishers

Pilot House, Flybridge, Galley, Salon, and Master Stateroom: One (1) each USCG TYPE B-II (five total)

Guest and Crew Cabins: One (1) each USCG TYPE B-1 (three Total) 

Lighting

Interior Overhead Lights, F/B and side decks: 24 volt Imtra ” Ventura LED” warm in color. All Lighting controlled by “Vimar” wall switches in black. (Approx. 100 lights)

Exterior Overhead Lights, F/B and side decks: 24 volt Imtra ” Ventura LED” cool in color. All Lighting controlled by “Vimar” wall switches in black. (Approx. 35 lights)

Interior Overhead Reading Lights: 24 volt Cantalupi “Tebe” 2000 direction spot lights controlled from separate switches (Approx. 15 lights)

Engine Room and Lazarette Lights

120 volt AC fluorescent (Approx. 8 lights)

24 volt DC “Suzy” (Approx. 8 lights)

Courtesy Lights

Exterior: “Kodiak” LED, 24 volt stainless steel pt# ILSH70225 (Approx. 30 lights)

Interior: “Kodiak” LED, 24 volt stainless steel pt# ILSH70205 (Approx. 55 lights)

Hanging Locker Lights: “Resolux” 24 volt, 512 series, pt# IL4682 (Approx. 8 lights)

Navigation Lights and Signal lights for vessels over 65′ 7″ (20 m): Aqua Signal 55 Series

Port nav light – #55300 24 volt

Star nav light – #55200 24 volt

Stern light – #55500 24 volt

Steaming light – #55400 24 volt

Anchor light – #55000 24 volt

Restricted maneuverability lights – #55000 x two (2), all around red. 24 volt.

Stainless steel “Light Stand”

Owner’s Cabin and Forward Cabin. Owner’s and Guest cabin to have two (2) 24 volt Cantilupi “Vienna” chrome bronze swing arm reading lights each cabin. (4 total)

Deck Floodlights: Three (3) Aqua signal 120 volt/500 watt series 1069 mounted on port and starboard F/B hardtop and aft side of FRP stack

Carlisle & Finch 200 Watt Spotlight #XY2EDE-RF with dual station remote controls. Unit mounted on the flybridge hardtop 

Exterior Deck Hardware

All Horizontal Surfaces on Deck to have a diamond pattern non skid as shown in deck plan – standard non skid to be a contrasting color to parameter deck

Lower Aft Deck and Side Decks to have 1/2″ (1.27 cm) thick teak overlay

316 Stainless Handrails 1-1/4″ (3.2 cm) diameter with electro polished bases

N57 style transom hand rails

N57 style hand rails along port and starboard side deck coamings

N57 style rail on underside of aft deck overhang

Rail around F/B sink console

Rails: 41″ (104.1 cm) rails at stairs going up from side deck to P/B to be recessed

Vertical handrail on the port and starboard boarding doors

Nine (9) 316 Stainless Steel Hawse Fittings: Eight (8) port and starboard per drawing 5″ x 10″ (12.7 cm x 25.4 cm) with solid S/S cleats. Recessed into bulwarks where possible. One (1) on aft center line with cleat (Cleats to be solid stainless steel bar)

Two (2) 316 Stainless Steel Bollards centerline aft of windlass

Upper Rub Rail Cap to be 316 stainless steel 2-1/2″ W x 7/16″ thick (6.35 cm W x 1.11 cm thick) fastened with flush 316 stainless steel fasteners. Stainless steel caps on upper and lower rub rails as shown in design

Lower Rub Rail Cap to be 316 stainless steel 1-1/2″ W x 5/16″ thick (3.8 cm W x 7.94 mm thick)

Manship Ports in Hull and Deck. Ports positioned as follows

Seven (7) starboard side hull 8″ x 16″ (20.32 cm x 40.6 cm) oval (3 opening and 4 fixed)

Six (6) port side of hull 8″ x 16″ (20.32 cm x 40.6 cm) oval (2 opening and 4 fixed)

All opening ports to be fitted with screens and deadlights

316 Stainless Steel Double Bow Roller – rollers to be slotted for chain. Roller to be built per PAE design

316 Stainless Steel Bow and Stern Pulpits and stanchions to be 1-1/4″ (3.2 cm) diameter. Bow pulpit to have socket for 1″ (2.5 cm) burgee staff. Bases to be round with fastening stud welded on bottom, except upper deck which will be fastened with flat head screw

Foredeck to have solid 316 stainless rail with lifeline in middle section. Bases to be round with fastening stud welded on bottom. All bases to have drain holes on bottom

Windshield Wipers: “Exalto” 2-speed self-parking motor, with wash system for five (5) front windows

#EX2167.32 wiper motor 223BS 24 volt/23Nm, for 1-3/8” (34.5 mm) bulkheads x five (5)

#EX2133 T1 Pantograph arm 10.6″ -17.7″ (270-450 mm) adjustable x five (5)

#EX2171 curved wiper blade 16″ (40.6 cm) x five (5)

#EX2159 Combo switch for single wiper 24 volt x five (5) (custom engraved panel per PAE design)

#EX2143 24 voltolt solenoid valve for wash system x one (1)

#EX2133.03 tubing retainer strip x five (5)

#EX2184 Washing Jet for type 1 adjustable pantograph arm x five (5)

#EX2186 plastic bulkhead connector for 19.7″ (50 cm) – new style

#EX2154 Tubing 1/4” (6.35 mm) soft black x 16′ (5 m)

#EX2157 Tubing 1/4″ (6.35 mm) hard black for push fit plumbing fittings x 16′ (5 m)

#EX2129 elbow .24″ (6 mm) x six (6)

#EX2166 T-coupling .24x.24x.24″ (6x6x6mm) x four (4)

#EX2119 straight coupling , 1/4” (6.35 mm) x one (1)

Horn: Kahlenberg dual trumpet #D-1 with white finish

Deck Hatches: Per deck plan, one (1) Lewmar #70 “Ocean Series” to include insect and privacy screens. Two (2) Lewmar #50 “Ocean Series” to include insect and privacy screens

Dorade Vents: Two (2) to have FRP box with standard TS style 316 SS cowl vent inside painted white and to be positioned per PAE deck plan

Access to Flybridge From Wheel House thru hinged cockpit hatch custom built by PCM

Windows by Pacific Coast Marine with 1/2″ (1.27 cm) thick laminated tempered glass
All side windows to be tinted glass

Two wheel house opening windows to be PCM with insect screens

All salon windows to be recessed 1″ (2.5 cm)

Aluminum doors by Pacific Coast Marine as follows (Note: interior as well as exterior PCM doors are included in this schedule)

Wheel house – Two (2) each Weather Tight Dutch door. One (1) L.H. Mortise hinge, one (1) R.H. Mortise hinge. C.O. 21″ x 73″ (53.3 cm x 185.4 cm)

Salon after – One (1) each Weather Tight Sliding door. 54″ x 73″ (137.2 cm x 185.4 cm)

Salon starboard side – One (1) each Weather Tight Dutch door, R.H. Mortise hinge. C.O. 21″ x 73″ (53.3 cm x 185.4 cm)

Engine room – One (1) each, Water Tight model no. PCM4170-W with sound blanket core, painted. R.H. surface mount hinge. C.O. 21″ x 73″ (53.3 cm x 185.4 cm)

Lazarette – One (1) each, with port hole, Water Tight model no. PCM4170-W with sound blanket core, painted. R.H. surface mount hinge. C.O. 21″ x 46″ (53.3 cm x 116.8 cm)

Bilge bulkhead between station 2 – 3, and bulkhead at station 1. Two (2) each Water Tight doors, R.H. surface mount hinge. Painted

Please not that the weather tight doors are to have mortise hinges. The watertight doors are to have surface mounted hinges

Boarding Doors: port and starboard – opening in two (2) pieces. Top to fold up and over and bottom to open outboard. Stern door on starboard side aft per drawing. Doors to have Freeman “blind” dog lock/handles

Davit Marquipt2500 lb (1134 kg) capacity hydraulic/240 volt AC davit with extendable boom to 21′ (6.4 m) mounted on port aft side of boat deck per drawing. Davit sized and positioned to launch dinghies from port side and stern

Aft deck Exterior Cabinet

Sink: Stainless steel to drain directly overboard

Faucet: Shurflo #133-0210-CP

Control alcove for DDEC engine control ABT bow and stern thruster jog levers, start/stop, air horn push buttons and forward windlass control

Bottom Treatment: Three (3) layers of epoxy barrier coat and three (3) coats of anti fouling paint

Two (2) coats of antifouling to be applied at Ta Shing and one (1) coat to be applied after the boat is hauled out at Kaohsiung before shipment

Upper Deck to Drain through six (6) 2″ (5.08 cm) scuppers (3 per side)

Anchor Wellto Drain through scupper 2″ (5.08 cm) diameter

Port and Starboard Storage Lockers in Portuguese bridge with FRP louvers

FRP Exhaust Stack/Radar Mast with flag halyards port and starboard

Portuguese Bridge Control Stations port and starboard side of forward Portuguese Bridge. Station to be recessed into Portuguese Bridge as on N57 with DDEC control, bow and stern thruster controls, start/stop/horn. Recess to have courtesy light inside

Flybridge with FRP Hardtop, sink, U-Line #CO2175FFS drinks refrigerator, and two (2) Stidd “Slimline” helm chairs #500n-2×2 white vinyl and settee with vinyl cushions and high gloss teak table. Sink to drain directly overboard. Ritchie #SS 5000 compass installed on FRP pad

FRP hardtop finished with smooth Gelcoat, With white non-skid

Hardtop to have a stainless rail continuation of the ladder on the topside of the hardtop to allow a person to easily access this area

Flybridge to have four (4) freeing ports (2 port and 2 starboard)

Stern Capstan Winches: Two (2) Maxwell VC 2200 24 volt port and starboard

Flag Staff: 48″ (121.9 cm) with socket for aft cap rail

Door to Foredeck through Portuguese bridge with freeman dog set

Freeman Watertight Deck Hatch over chain locker, #18HAALR x two (2)

Anchor: 300 lb. (136 kg) stainless steel Plow x two (2)

Chain: 800′ – 1/2″ HT Chain (243.8 m – 1.27 cm) in two (2) 400′ (121.9 m) lengths from port and starboard chain lockers

Swim Ladder: Stainless steel with teak steps mounted on swim step under an FRP hatch

Cleats: Two (2) Pop-up Style 10″ (25.4 cm) Cleatson swim step port and starboard for dinghy tie up

Windlass: Maxwell VWC 4500 hydraulic with band brake and 1/2″ (1.27 cm) HT chain gypsy x two (2)

Maxwell Chain Stopper for 1/2″ (1.27 cm) diameter HT chain x two (2)

All Exterior Locker Doors to use “Perko” fig. 777 flush hatch dogs as latch

All Exterior Locker Doors to have FRP louvered vents

All Exterior Door Keepers to be ABI #2039CH

Two (2) Fishing Pole Holders flushed into bulwarks in cockpit. One (1) each port and starboard sides with drains

Stainless Steel Breast Plate with two (2) anchor wash nozzles and Nordhavn emblem

Large Pad Eye at stem through boot top 1-1/4″ (3.2 cm) O.D

Life Ring Port and Starboard Side of wheel house in recess

Four (4) “U” Shaped Rails across swim step

Nordhavn Name Plates: One (1) each port and starboard side per PAE design

All Deck Washes to be installed in recessed FRP boxes with FRP doors

Foredeck Lockers, Three (3) total: two (2) flush style port and starboard and one (1) on centerline fwd. of P/B. Centerline locker to have gas shocks to hold open

Gasoline Storage Tank 80 Gallon (303 liter) with electric pump installed in a FRP box on the upper deck

“Flopper Stopper” System for use at anchor. System to include folding poles port and starboard with associated rigging and two (2) Prime “wing” type flopper plates

Zincs

Ship loose two (2) left hand shaft zincs and two (2) right hand shaft zincs

Ship Loose four (4) B4 plate zincs

Marquipt Dinghy Ladder

News

See all
Sanctuary Boatshow 20248

The Sanctuary Boat Show is on!

May 24, 2024
Read More >>
N6838 32topaz

Got Summer plans? Nordhavn owners sure do!

June 19, 2023

We are just days away from the Solstice, and the official start of the summer

Read More >>
N76 Spirit Of Ulysses Oil Mishap

Why you shouldn’t be concerned about Spirit of Ulysses’ latest mishap

June 6, 2023

https://nordhavn.com/wp-content/uploads/2023/06/N76-Oil-Video.movOn Sunday night (local time), Nordhavn 76 Spirit of Ulysses developed a tiny leak inside the oil

Read More >>
Spirit Of Ulysses 30

CRUISING ODYSSEY: Nordhavn 76 Completing Epic Transatlantic Voyage

December 17, 2021
Read More >>
Spirit Of Ulysses 19

Powerboat World: N76 Crossing the Atlantic

December 6, 2021
Read More >>
James Leishman 1

Coronavirus forces buyers to make leap of faith purchases

October 2, 2020

Nordhavns are purchased and sold internationally all the time, but making deals across different countries

Read More >>
N76 Tortuga Cabo San Lucas

N7616 “Tortuga” arriving in Cabo today

November 9, 2018

N7616 “Tortuga” arriving in Cabo today

Read More >>
N6076 Delivery 1

Shipping Nordhavn 7626 and 6076

October 3, 2018

N6076 offloaded in Ensenada, Mexico and N7626 will continue on to Florida

Read More >>

Videos

Pre-Owned Nordhavn 76s For Sale

See all
N76 Reliance 1

NORDHAVN 76
‘RELIANCE’

May 17, 2024
NAME: “Reliance”
MODEL: Nordhavn 76
YEAR: 2007
PRICE IMPROVEMENT: 3,950,000 AUD
Read More
N76 Take 5 1

NORDHAVN 76
‘TAKE 5’

August 23, 2023
NAME: “Take 5”
MODEL: Nordhavn 76
YEAR: 2009
PRICE: $3,300,000
Read More

Request More Info

  • This field is hidden when viewing the form
    Download CSV of entries prior to 8/6/24 with this link: https://www.dropbox.com/scl/fi/kksup79nrwgq4z0e0uekr/contact-nordhavn-models-3-columns-in-use-2024-08-06.csv?rlkey=b17jd16vqplc03smezt5yq4tb&dl=0
  • *Addresses are strictly for internal use only and will never be provided for third party usage. PAE will never send anything to your home address without your permission
  • This field is hidden when viewing the form
  • This field is hidden when viewing the form
  • This field is for validation purposes and should be left unchanged.

Nav

MODELS

Nordhavn Fleet

Nordhavn 41

Nordhavn 475

Nordhavn 51

Nordhavn 52

Nordhavn 56MS

Nordhavn 59CP

Nordhavn 60

Nordhavn 625

Nordhavn 63

Nordhavn 68

Nordhavn 71

Nordhavn 75EYF

Nordhavn 76

Nordhavn 80

Nordhavn 86

Nordhavn 96

Nordhavn 120

 

New Deliveries

 

Available for viewing

 

Retired Models

Mason Sailboats

Nordhavn 35CP

Nordhavn 40

Nordhavn 43

Nordhavn 46

Nordhavn 47

Nordhavn 50

Nordhavn 55

Nordhavn 57

Nordhavn 62

Nordhavn 64

Nordhavn 72

Fundamentals

On The Drawing Board

COMMUNITY

Drawing Contest

Virtual Ocean House

Nordhavn Life

Nordhavn Adventures

ATW 

Nordhavn Atlantic Rally

Voyage Of Egret

Nordhavn 120 Delivery

Nordhavn Film Festival

Blogs

Rendezvous

Distance Pennant Program

Discussion Groups

Social Networks

NEWS

Headlines

Nordhavn Live

Articles

E-Newsletter

Awards

PRE-OWNED

All Listings

European Listings

Australasia Listings

Testimonials

Overview

COMPANY

History

Team

Oceans Apart

Passagemaking Stats

Ocean Crossings

Circumnavigations

Extreme Cruising

RESOURCES

Nordhavn International

Circumnavigator

Calendar

Photo Gallery

Videos

Quick Clips Video

Profiles Videos

Owners Videos

Boat Shows

Merchandise

Charters

Parts

Vendors

Tech Talk

CONTACT

MODELS

Nordhavn Fleet

Nordhavn 41

Nordhavn 475

Nordhavn 51

Nordhavn 52

Nordhavn 56MS

Nordhavn 59CP

Nordhavn 60

Nordhavn 625

Nordhavn 63

Nordhavn 68

Nordhavn 71

Nordhavn 75EYF

Nordhavn 76

Nordhavn 80

Nordhavn 86

Nordhavn 96

Nordhavn 120

 

New Deliveries

 

Available for viewing

 

Retired Models

Mason Sailboats

Nordhavn 35CP

Nordhavn 40

Nordhavn 43

Nordhavn 46

Nordhavn 47

Nordhavn 50

Nordhavn 55

Nordhavn 57

Nordhavn 62

Nordhavn 64

Nordhavn 72

Fundamentals

On The Drawing Board

NEWS

Headlines

Nordhavn Live

Articles

E-Newsletter

Awards

PRE-OWNED

All Listings

European Listings

Australasia Listings

Testimonials

Overview

COMPANY

History

Team

Oceans Apart

Passagemaking Stats

Ocean Crossings

Circumnavigations

Extreme Cruising

COMMUNITY

Drawing Contest

Virtual Ocean House

Nordhavn Life

Nordhavn Adventures

ATW 

Nordhavn Atlantic Rally

Voyage Of Egret

Nordhavn 120 Delivery

Nordhavn Film Festival

Blogs

Rendezvous

Distance Pennant Program

Discussion Groups

Social Networks

RESOURCES

Nordhavn International

Circumnavigator

Calendar

Photo Gallery

Videos

Quick Clips Video

Profiles Videos

Owners Videos

Boat Shows

Merchandise

Charters

Parts

Vendors

Tech Talk

CONTACT

  • Website Comments
  • Privacy Policy
  • Terms and Conditions
  • .
Copyright 2025 - Nordhavn
Close Menu
  • Home
  • Models
    • Nordhavn Fleet
    • New Deliveries
    • Available For Viewing
    • Retired Models
    • Fundamentals
    • On the Drawing Board
  • News
    • Headlines
    • Nordhavn Live
    • Articles
    • E-Newsletter
    • Award Winners
  • Pre-Owned
    • Overview
    • All Listings
    • European Listings
    • Australasia Listings
    • Testimonials
  • Company
    • History
    • Team
    • Oceans Apart
  • Community
    • The Nordhavn Life
    • Nordhavn Film Festival
    • Blogs
    • Rendezvous
    • Distance Pennant Program
    • Discussion Groups
    • Social Networks
  • Resources
    • Calendar
    • Videos
    • Boat Shows
    • Merchandise
    • Charters
    • Parts
    • Vendors
  • Social Media
    • Facebook
    • YouTube
    • Instagram
    • Twitter
  • Contact
×
×

Cart